Bluonics 10" Big Blue Whole House Water Filter with 5 Micron Sediment Cartridge for Rust, Iron, Sand, Dirt, Sediment and Undissolved Particles

• COMPLETE:  1 Complete 10 inch Big Solid housing, 1"NPT inlet/outlet, with plastic wrench, 4 x screws, and metal bracket

• POWERFUL: 1" MNTP Inlet / Outlet, 10”x 4.5” Filter Cartridges has minimum impact on water flow. With a large capacity housing it can be used for high flow applications such as city/municipal or well water. Flow rate : 5-15 GPM (Depend on Feed Water Pressure)
  

• RELIABLE: Fits all standard sized 4.5 x 10 inch industry whole house cartridges. All housings come with pressure release button for high pressure making it easier to replace the filter.
  

• This system is not a Reverse Osmosis and will NOT reduce (TDS) Total Dissolved Solids from your water. Looking for a system to remove TDS, you can check Bluonics RO systems. The cartridges are individually wrapped for freshness. Please unwrap the cartridges before using them.

Description

Maximum Pressure: 80 PSI, SUGGESTED WORK PRESSURE: UNDER 50 PSI, Temperature:40-110°F/5-45°C, Shelf life: 5 Years. Standard sized housing for 4.5" x 10" filters

Filters Included:  4.5 x 10"  Sediment (5 Microns) to remove particles such as silt, sand, rust, dirt, and other undissolved particles. Expected life time: 6 months. (depends on water quality)

Protect filter housing from freezing.

Maximum operating pressure rating of 80 psi, if you suspect that your water pressure will at any time exceed 60 psi, a pressure regulator must be installed before the filter housing and be set at 50 psi or less.

The rubber o-ring provides a good grip between the cap and the sump. Please make sure that the o-ring be properly seated in the groove to avoid any leaks.

Great after-sales customer support: 30-day money-back guarantee. Extended manufacturer warranty. Lifetime tech support from Bluonics in Sacramento, California, USA (888) 207-8939